Automatic mould oiling machine
In aerated concrete production, mold cleaning oil has been manually
completed, this by manual hand rolling brush on the mold inner wall
brush, not only the labor intensity is high, and the working
environment is poor, high production cost, not conducive to
The automatic oiling machine produced by SANKON is specially
developed for the mold oiling station of aerated concrete
production line. It is light and simple in appearance, and the
whole process is automatically controlled, which can reduce labor
intensity and labor cost. The oiling process is clean and
environmental friendly, and easy to operate and maintain.
The oiling machine is composed of four parts: mechanical part,
electrical control system, oil supply system and positioning
system. In an imitation of manual oiling, a mechanically driven
roller brush is used for oiling.Reduce the dispersion of oil and
gas particles in the air, reduce air pollution and harm to human
1. The high-precision moving part is controlled by servo motor, and
the error is within 1mm, which fully ensures the control of the
uniformity of oil film in the process of oil painting.
2. Flexible control to complete four or five sides of the mold
frame oil according to different needs, and can adjust the oil
amount at any time.
Since there is no special requirement on the quality of demoulding
oil, it can be applied to any kind of demoulding oil. The oil
amount can be adjusted according to needs. The normal oil amount
can be 0.28kg/m, and the minimum oil amount is 0.18kg/m.
Main technical parameters:
Operating voltage: AC380V 50HZ
Total power: 5.5kW
Working pressure: 0.6mpa
Steam pressure: 0.4MPa
Operating temperature: -10℃~80℃
Duty cycle: ≤3min